Here is a guide to help you fit a BSC threaded external bearing bottom bracket, one of the most common standards on MTBs.
- Time: 30 min
- Level: Intermediate
- Tools: External bottom bracket tool | Wire brush | Grease
Steps
- Run a brush through the bottom bracket shell of your frame to remove any potential swarf or burrs from machining.
- Grease the threads of the MTB frame and those of the bottom bracket.
- Hand-thread the right-hand side of the bottom bracket anticlockwise. Finish tightening with the bottom bracket tool.
Probikeshop tip: as the thread is very fine, only use the bottom bracket tool once you are certain the bottom bracket is properly engaged.
- Then hand-thread the left-hand side of the bottom bracket clockwise, followed by the bottom bracket tool for the final tightening.
All that remains is to fit your crankset.
Découvrez tous nos conseils & Tutoriels
MTB - Bottom Brackets and Bearings
-

SRAM DUB BSA 73mm Bottom Bracket
Regular price 186,00 DKKRegular priceUnit price perSale price 186,00 DKK -
SRAM DUB PRESSFIT 89/92mm Bottom Bracket
Regular price 304,00 DKKRegular priceUnit price perSale price 304,00 DKK -
Bottom Bracket SHIMANO MT501 BSA
Regular price 160,00 DKKRegular priceUnit price perSale price 160,00 DKK -
SRAM DUB BSA 68/73 mm Bottom Bracket
Regular price 253,00 DKKRegular priceUnit price perSale price 253,00 DKK -
RACE FACE CINCH BSA/BSC 30mm Axle 68/73mm Bottom Bracket
Regular price 295,00 DKKRegular priceUnit price perSale price 295,00 DKK -

SRAM GXP TEAM BSA 68/73 mm Bottom Bracket
Regular price 253,00 DKKRegular priceUnit price perSale price 253,00 DKK -

Bottom Bracket SHIMANO MT800 Press Fit 89.5/92mm
Regular price 211,00 DKKRegular priceUnit price perSale price 211,00 DKK -

Bottom Bracket SHIMANO XTR SM-BB94-41A Press Fit 89.5/92mm
Regular price 295,00 DKKRegular priceUnit price perSale price 295,00 DKK



