How to fit a mountain bike crankset?
Have you just received your new crankset? Here's how to fit it to your MOUNTAIN BIKE simply.
- Time : 10 min
- Level : Easy
- Tools : Allen key set | Grease
Steps
REMINDER :Visit mountain bike cranksets Hollowtech II and GXP cranksets are the most widely used, so here's how to fit these versions.
1. Grease the crankset axle to facilitate assembly and protect it from corrosion.
2. Thread the axle into the bottom bracket until it stops. In the case of a GXP, you may need to add washers before inserting the axle. Please refer to the manual.
3. Fit the 2nd crank on the bottom bracket axle.
4. For a Hollowtech II adjust the play in the crankset using the nut at the end of the axle, then tighten the two BTR screws on the crank to the torque indicated. For a GXP, tighten the bolt at the end of the axle to the indicated torque.
Your crankset is now assembled. It's important to check play and tightness after your first ride at bike.
Découvrez tous nos conseils & Tutoriels
MTB - Cranksets and Cranks
-
RACE FACE ERA CINCH crankset Black
Regular price 1.682,00 DKKRegular priceUnit price per -
SRAM XX1 SL EAGLE DUB BOOST 12 Speed Mono crankset Black/Grey
Regular price 2.524,00 DKKRegular priceUnit price per -
SHIMANO SLX M8100 12V Mono crankset
Regular price 758,00 DKKRegular priceUnit price per -
RACE FACE TURBINE CINCH crankset Black
Regular price 842,00 DKKRegular priceUnit price per -
SHIMANO SLX M7100 12V Mono crankset
Regular price 589,00 DKKRegular priceUnit price per -
Mono crankset 10/11 Speed SHIMANO FC-M5100-1
Regular price From 505,00 DKKRegular priceUnit price per -
RACE FACE AEFFECT CINCH crankset Black
Regular price 674,00 DKKRegular priceUnit price per -
Mono crankset 12 Speed SRAM EAGLE GX DUB BOOST Lunar
Regular price From 1.060,00 DKKRegular priceUnit price per
