Skip to product information
1 from 1
HUTCHINSON

HUTCHINSON PROTECT'AIR inner tube 26x 1.70 - 2.35 Schrader 48mm

HUTCHINSON Protect'Air tubes contain a dose of preventive liquid, instantly and effectively repairing punctures. Read more
Regular price 101,00 DKK
Regular price Sale price 101,00 DKK
View full details

Description


HUTCHINSON Protect'Air tubes contain a dose of preventive liquid, instantly and effectively repairing punctures.

Ref: 7977538715814

Points forts

Premium butyl for excellent pressure retention.

Contains a dose of anti-puncture fluid to effectively counter the risk of punctures.

Informations techniques

Tube thickness: 0.9 mm
Max. width: 2.35
Min width: 1.70"
Valve length: 35 mm
Wheel Sizes: 26"
Tube type: Puncture-proof
Valve : Schrader

Informations prix

*Recommended retail price February 2024

Overall rating: 3.9473684 / 5 from 19 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["air", "punctures", "tube", "measures", "repairs"].

Review highlights

Reviews

Limits risk without magic

"The repair fluid limits the leakage from the puncture and, with a bit of luck, gets you home. But that's where it stops: the wheel is still flat the next day. The butyl in the product is not easily repaired: it's better to start again with a new chamber and ride with peace of mind. ."

Fred785 (3/5)

Top, does the job

"Top, does the job very well. I still add 100ml of preventive fluid. I haven't had a puncture in a long time. I ride maxxis crossmark II in 26x2. 1 inflated to 1. 8av and 2. 1ar on the way. No pinches or punctures.

Fredodu47 (5/5)

SATISFIED WITH ITS USE

"VERY USEFUL INNER TUBE TO AVOID PUNCTURES".

Menagert (5/5)

All right!

"Nothing to say, as described. More detailed notice to follow after use... ."

Vctc (5/5)

The joy of no longer dying.

"I ride everywhere where nobody normally rides (bramble fields, off-road in the forest, . . . ) and just a puncture because the huge thorn planted in the tire remained. Once the thorn had been removed, I turned the wheel a few times so that the preventive would take the place of the hole, then reinflated the tire by hand, and it hasn't leaked since. The joy of no more punctures."

Lionelsgard (5/5)

Very satisfied.

"Once again, not disappointed by the brand. I haven't ridden much with it (200km), still no punctures, where usually I was good at putting at least a patch to one of the inner tubes. I'm very optimistic for the next few rides."

Blackfoot (5/5)

These rooms are always sweltering

"These air chambers burst all the time, they tear as soon as they are inflated, and when you burst in the woods you can't put them in your bag because there is green liquid dripping from them and they take up a lot of space. In short, they're useless. I'll never buy another one.

Antoine (1/5)

It works

"Mounted at the front with a little 330g hyper light and inflated to 1. 6-1. 8 bars depending on the terrain, this self-repairing inner tube works. It doesn't lose pressure. One day when I was preparing the bike, the front tire was a bit deflated, so I re-inflated it and it held. Then when I took the tire apart, I found a needle firmly embedded in it, which had perforated the chamber. There was green stuff all around the needle and the hole in the tube was perfectly sealed. What's more, it's a lot lighter than the anti-puncture competitors."

Duxm (5/5)

Perfect

"Mounted front and rear with Maxxis, no punctures after several months of touring."

Bandits (5/5)

like a tubeless

"Inner tube with a good dose of product inside, you can tell when you receive it. On the other hand, it deflates very slightly, like a tube, minus 0.5bars in 3 weeks, even though the bike hasn't been ridden since... a bit worrying. A normal inner tube doesn't lose air as quickly, and a rival puncture-proof tube from Bibendum that I've had for nearly 2 years has hardly deflated at all in the same time. In short, it remains to be seen. In any case, for the competitor, no puncture to be deplored. On the other hand, when deflating, to change a tire for example, some product escapes and causes the valve to leak... . The solution is to re-inflate violently with a foot pump to "clean" the valve before the product dries."

Mikpro (3/5)

Q&A